Answer
Topographic elevation is a point's height above or below a fixed reference point, most commonly a reference geoid approximating mean sea level. In geodesy, it is formalized as orthometric height. Elevation is distinct from distance from the center of the Earth. In the common gazetteer-derived case, the number refers to one point—a downtown square, city hall, survey benchmark, or a feature's primary coordinate—rather than a computed average over the whole municipality. Wikipedia's settlement infobox is a display template with optional elevation_m and elevation_ft fields, separate elevation_max and elevation_min fields, an elevation_point field 'for denoting the measurement point', and elevation_footnotes for references. The displayed number therefore depends on whatever source the article cites—a gazetteer, topographic map, government figure, survey benchmark, or digital elevation model. Where the source is the U.S. GNIS, elevations are approximate because they are interpolated from terrain elevations sampled on a grid, and they are not official and do not represent precisely measured or surveyed values. GNIS states that 'The primary coordinate values for areal features are taken at the approximate center'. A city infobox therefore normally shows a single representative spot elevation, or a highest-and-lowest range, not a standard municipal mean.
Current evidence
Geodetically, elevation in this sense is height above a vertical datum, and it is formalized as orthometric height. The zero level varies in different countries due to different reference points and historic measurement periods. A GNSS receiver determines a 3D position. A geoid is needed to convert the 3D position to sea-level elevation. Common techniques include surveying, especially levelling, GNSS with a geoid model, pressure altimetry, stereoscopy in aerial photography, aerial lidar and satellite laser altimetry, and radar altimetry. These methods differ in accuracy and in the point they represent; a DEM value, for example, is a sampled model value rather than a surveyed benchmark. For U.S. federal publications, USGS guidance says to state the vertical datum name and year in that document when a product refers to an altitude or an elevation, and that if a GNSS survey is used to establish elevations, the geoid model used to convert ellipsoid heights to orthometric heights should be referenced. The same guidance says that general physical descriptions of an area, which include elevation, do not require a datum. That exemption helps explain why an encyclopedia infobox can give a bare number without naming a datum. For GNIS, the current FAQ says the values are not official and do not represent precisely measured or surveyed values, that elevations are approximate because they are interpolated from terrain elevations sampled on a grid, and that the elevation information is derived from the U.S. Geological Survey's 3D Elevation Program. GNIS also warns that its figures might differ from elevations cited in other sources, including those published on USGS topographic maps. Older GNIS metadata defined elevation as 'The elevation above sea level of the feature at the primary point' and said 'The data are extracted from the National Elevation Dataset' for the primary coordinates. It also stated that 'The primary coordinate values for areal features are taken at the approximate center'. Thus a GNIS-derived city figure is a modelled ground elevation near a representative point, not a municipal mean.
Limitations
Several caveats apply. The infobox value is only as specific as the cited source; the documented elevation parameters are optional, and the template supplies elevation_m and elevation_ft, elevation_max_m and elevation_min_m, and elevation_point ('for denoting the measurement point'), but no dedicated datum parameter. GNIS warns that its elevations do not represent precisely measured or surveyed values. 'City elevation' is ambiguous where a municipality spans hills and valleys: the template provides separate elevation_max_m and elevation_min_m fields alongside elevation_m, so a single value and a citywide range are not the same kind of figure. National vertical datums differ: the zero level varies in different countries due to different reference points and historic measurement periods. USGS guidance states that it is recommended that a uniform datum be presented when data from several datums are compared. This answer is based on documentation and the template's parameter list, not a systematic audit of city articles, so the mix of practice across languages and regions is uncertain.
What this means
For anyone using a Wikipedia city elevation, the underlying GNIS-style definition is 'The elevation above sea level of the feature at the primary point', so treat it as a sourced spot height rather than a precisely defined municipal statistic. When reporting an elevation professionally, state the vertical datum name and year in that document and reference the geoid model used to convert ellipsoid heights to orthometric heights if GNSS was used. For comparisons across cities, do not mix infobox values blindly: USGS guidance states that it is recommended that a uniform datum be presented, and the original datum should be documented. For engineering, permitting, aviation, or flood analysis, use official surveyed benchmarks and the legally applicable vertical datum, because GNIS-derived figures do not represent precisely measured or surveyed values. For general readers, a metres-above-sea-level figure is a reasonable rough indication of a city's topographic setting, provided they understand that the template can report elevation_max_m and elevation_min_m alongside the single elevation_m value.
EvidenceSources (6)
Last checked 2026-10-28Source details
Sources (6)
Confidence is an AI estimate, not an independent assessment of source quality.
- Elevation
Wikipedia contributors · 2026-10-14
Reputable websiteAI confidence: 90% - Height above mean sea level
Wikipedia contributors · 2026-10-13
Reputable websiteAI confidence: 88% - Template:Infobox settlement/doc
Wikipedia contributors · 2026-10-20
Reputable websiteAI confidence: 90% - What is the Geographic Names Information System (GNIS)?
U.S. Geological Survey
Reputable websiteAI confidence: 92% - Guidance on Use and Documentation of Horizontal and Vertical Datums in USGS Publication Series Information Products
U.S. Geological Survey, Office of Science Quality and Integrity · 2019-03-01
GuidelineAI confidence: 92% - Domestic Names - Metadata
U.S. Geological Survey · 2009-08-18
DatasetAI confidence: 80%
Update history
- Auto-checkVersion 3Refreshed the answer against current Wikipedia template documentation and USGS GNIS and datum guidance, corrected citation passages to exact quotations, and clarified that a typical infobox figure is a GNIS-style spot elevation at an approximate centre rather than a municipal mean or official survey.6 sources · AI-generated
- Auto-checkVersion 2Refreshed the answer with current USGS GNIS guidance, clarified that GNIS elevations are 3DEP-derived approximations rather than surveyed values, and tightened the distinction between a representative spot height and a municipal mean.6 sources · AI-generated
- Initial answerVersion 1Initial answer; no prior draft was supplied.6 sources · AI-generated